TREND MT/JIG/EURO Mortise and Tenon Jig Euro (Metric Size)

Trend Routing Workshop Jigs
Mortise and Tenon Jig Euro (Metric Size)
Ref: MT/JIG/EURO

• Enables mortise & tenons and dowel joints to be cut with a router to be cut with a router
• Ideal for cabinet, chair and table
• CNC precision manufactured plates and body
• One set-up for both mortise and tenon giving perfectly fitting joints
• Fully adjustable for compound angle joints up to 45 degree
• Reversible templates to produce round and square end tenons
• Templates can be used for accurate dowelling applications
• Cuts mortise & tenon sizes of 1/4 inch (6.35mm) to 5/8 inch (15.9mm)
• Guide bushes are included but cutters are required
• A Unibase may be required for certain makes & models of router
• All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters
• International PCT Appl No. PCT/GB02/00253

Items included 

• 5 x Guide bushes sizes 15.9mm, 22mm, 26mm, 28mm & 32mm
• 1 x Metal guide bush 30mm
• 4 x Clamps
• 1 x Guide bush collar
• 1 x Set-up Bar metric scale

• Material thickness min:12mm
• Material thickness max: 47mm
• Tenon thickness min: 4.8mm
• Tenon thickness max: 16mm
• Tenon length max. using vertical guide+: 90mm
• Mortise length max. using vertical guide++: 90mm
• Angle tilt compound: -10 degree to 45 degrees

+ on end of 100mm wide material
++unlimited if vertical guide removed and wood repositioned

Trend MT/JIG Manual