TREND KWJ700S SQUARE EDGE KITCHEN WORKTOP JIG 700MM

Trend Routing On-Site Jigs 
Multi-Material Square Edge Kitchen Worktop Jig 700mm
Ref: KWJ700S

• Worktop jig for use on square edge and standard kitchen worktop
• Quick and easy set up
• Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up
• Use on composite square edge, laminate and solid wood worktops
• For square edge and small radius edge worktops to produce a neater joint
• For standard radius edge postform laminate worktops
• Preset kitchen worktop widths for ease of set up
• Left and right hand joints for most kitchen layouts
• Precise fit ABS plastic location pins for accuracy
• 10mm offset cut for composite, solid wood and square edge worktop.
• 35mm offset cut for standard laminate postform worktop
• Preset for worktop widths 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 635mm, 650mm and 700mm
• 35mm hinge recess facilit
• Three open ended dog bone style bolt reces
• Radius curves at 40mm, 100mm and 400mm
• 45 degree end cut
• Jig requires:
• A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts
• A template guide bush with 30mm outside diameter ref. GB30
• A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length
• Two clamps
  

• 6 x ABS Plastic Pins

• Length: 985 mm
• Width: 390 mm
• Thickness: 12 mm
• Weight: 5.4 kg
• End cut:45 degrees
• Corner Radius: 40 mm
• Corner Radius: 100 mm
• Corner Radius: 400 mm
• Female cut material width loss (inset): 10mm and 35 mm
• Guide bush: 30 mm
• Plunge router: 1/2-inch (min. 1300 watts)
• Cutter: 12.7 mm x 50 mm cut
• Clamps: Two