TREND H/JIG/B HINGE JIG B TWO PART PHENOLIC

Trend Routing On-Site Jigs - Hinge jig B two part phenolic - Ref: H/JIG/B

• A two part trade hinge jig to cut hinge recesses in doors & linings using a plunge router
• Two part, splits into two lengths with jointing plate
• Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate.
• One set up for door and frame. No need to adjust for repeated doors
• Four adjustable apertures
• For a 2 metre door hinges are 6 inch down and 9 inch up and the middle. Fourth hinge for fire doors (355mm /14 inches down from top of top hinge)
• For doors 16mm to 51mm thick with separate (plant on) stops, or stops thinner than 11mm
• Swivel end plate for 3mm gap to head of door
• Use with a light duty plunge router with 1/4 inch collet
• Includes three edge guides, three bradawls and 16 mm guide bush
• Unibase may be needed
• T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160

• 3 x Bradawls with spacers
• 3 x Edge guides
• 1 x 16mm guide bush
• 1 x Hex key
• 1 x Carry case

• Length: 50 mm (2") to 127 mm (5")
• Width min: 9.5 mm (3/8")
• Width max: 35 mm (1 3/8")
• Door sizes possible
• Height min: 1955 mm (6' 5")
• Height max:  2100 mm*
• Thickness min: 16 mm (5/8")
• Thickness max: 51 mm (2")
• Jig overall length: 1815 mm
• Fixed stop max. thickness: 11 mm**