Charnwood MTRS16 Modular Tool Rest Stem 1” Diameter x 6” Length with Stop Collar

Charnwood MTRS16 Modular Tool Rest Stem 1” Diameter x 6” Length with Stop Collar

Part of the 2 part Modular Tool Rest Range.

• Tool Post Stem 25.4mm (1") Diameter
• Tool Post Length 150mm (6")
• Pair With A Crossbar Of Your choice
• Stem Has A Mounting Thread M12 x 1.25
• Includes A Collar To Set The Post Height
• Chrome Finish Provides Corrosion-Resistance
• The Crossbar Can Quickly Be Swapped Over
• Compatible With Robert Sorby Modular Crossbar

Compatible Lathes:

• Charnwood W813
• Charnwood 1420V
• Charnwood 1421VF

• The tool post can be paired with any crossbar, which simply screws on to the top. Spanner flats are included to aid fast removal of the crossbar. You can also use a hex key in the bottom end, instead of a spanner.
• A locking collar is provided which can be used to ensure the tool post returns to the same height in the banjo when you adjust the angle of the crossbar. Particularly useful for bowl turners.
• The modular tool rest range is a 2 part system. Any crossbar can be paired with any stem. You can use one stem on your lathe and just change the crossbar to a different type when needed.

Choose A Crossbar:

• 100mm (4”) Wide Straight Crossbar
• 150mm (6") Wide Straight Crossbar
• 225mm (9") Wide Straight Crossbar
• 300mm (12") Wide Straight Crossbar
• S-Shaped Crossbar For Inside Of Bowls
• S-Shaped Crossbar For Outside Of Bowls
• Flat Platform For Hollowing Out

Choose a Stem:

• 5/8" Diameter x 3.5" Long With Stop Collar
• 1" Diameter x 4.75" Long With Stop Collar
• 1" Diameter x 6" Long With Stop Collar

• Stem Diameter: 25.4mm (1")
• Stem Length: 150mm (6")
• Mounting Thread: M12 x 1.25
• Stem Spanner Flats: 22mm
• Stem Hex Key: 6mm
• Locking Collar Hex Key: 3mm