Charnwood Heat Shrink Sleeving 100 - 50mm

Charnwood HS100/50
Heat Shrink Sleeve 100mm to 50mm

When there is not a suitable sized reducer to join your fitting to your machine outlet this heatshrink sleeve allows you to join them together.

This 100mm long piece can be cut down to the length need. Simply hold over the two connectors / outlets to be joined and then use a heat gun to shrink the sleeve down to give a strong air tight seal.

• Maximum size 100mm (4") Diameter
• Minimum size 50mm (2") Diameter

Buyers Guide to Dust Extraction