Trend Snappy 4pc Countersink and Plug Cutter Set - SNAP/PC/A

Trend Snappy 4pc Countersink and Plug Cutter Set

ref: SNAP/PC/A

• This set incorporates two drill countersinks and matching plug cutters.
• Plugs cutters are made from Tool Steel and are very slightly tapered.
• Use on timber to drill a countersunk hole for a screw which is then plugged uses a plug/pellet made using the plug cutter.
• Recommended that plug cutters are used in a pillar drill.

• 1 x Drill/countersink for No. 8 x 9.5mm
• 1 x Drill/Countersink for No. 10 x 12.7mm
• 1 x Plug cutter 9.5mm (3/8 inch)
• 1 x Plug cutter 12.7mm (1/2 inch)

• Shank Diameter: 1/4 inch hex
• Screw size: No.8
• Screw size: No.10