Kreg KCT - Kreg Clamp Table with Automaxx Clamps

Kreg Clamp Table with Automaxx Clamps - (Ref: KCT)

• The Kreg Clamp Table is the ultimate clamping solution for Kreg Joinery and works with the entire family of Clamp System Components. If you’ve ever struggled to get perfectly flush Kreg Joints, failed to get your clamps positioned exactly where you need them, or needed an extra set of hands around the workshop, the Kreg Clamp Table is your perfect solution.
• Note: This is the same table included in the Clamp Table and Steel Stand Combo, but comes without the stand so that you can place it wherever you need it.
• Auto-Adjust Technology. Thanks to Automaxx® Auto-Adjust Technology, included Bench Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2x4 and then a piece of 1/2" plywood without ever readjusting the clamp.
• Flexible Positioning. Stop working around your clamps and start working with them. The Clamp Trak allows you to position your Kreg Bench Clamps and Clamp Blocks along the table’s edge and quickly remove them to regain your flat work surface.
• Precise Alignment. Made from durable plastic, Kreg Clamp Blocks can be positioned anywhere along the Clamp Trak, allowing you to quickly register workpieces and bring your entire project into alignment.
• Durable Work Surface. Made from replaceable, glue-resistant melamine, this large 213/4" x 333/4" work surface is perfect for sanding, sawing, drilling, routing, joining, lay outs, and almost any other task.
• Rigid Foundation. The adjustable heavy-gauge steel stand is the perfect foundation for the Kreg Clamp Table. Adjustable from 31" to 39" (78.7cm to 99.1cm), this heavy-duty steel stand includes levelers to compensate for uneven floors. Add Heavy-Duty Casters for even more mobility.
• Versatile Clamping. Are you always looking for the right clamp? The Kreg Bench Clamp is great for almost any woodworking task. It slides across the Clamp Trak, rotates 360 degrees, and locks firmly into place wherever you need it.
• ** Heavy Duty Steel Stand not included in this package 

• Includes two 3" (76mm) Bench Clamps with auto-adjust technology
• Durable melamine surface resists glue and is easy to clean
• Two lengths of Clamp Trak allow easy clamp positioning
• Five Clamp Blocks make it easy to square up assemblies
• Compatible with the Multi-Purpose Shop Stand

• 2 x 3" (76mm) Bench Clamps with auto-adjusting technology
• 21-3/4" x 33-3/4" (552mm x 857mm) melamine work surface 
• 24" x 36" (609mm x 914mm) melamine-coated table base
• Two lengths of Clamp Trak
• Five Clamp Blocks
• Assembly hardware
• Owner’s manual