Charnwood V5IP - Indexing Plate for Viper5 Chuck

Charnwood V5IP - Indexing Plate for Viper5 Chuck

• Indexing Plate for Viper5 Chuck.
• The indexing plate fits onto the back of the Viper5 chuck, replacing the blank plate supplied as standard. It has 24 numbered positions set out at 15 degree intervals. Each position has a pin hole in the back of the plate and a slot in the side of the plate. An indexing attachment can then be used to add decorative features to a spindle or bowl at set intervals.
• The indexing plate is 5mm thick, 138mm outside diameter with three 4mm countersink holes at 54mm between centres.