Charnwood DKBF63 Dust Kit with Bench and Floor Sweeper for 63mm Hose

Charnwood DKBF63 Dust Kit with Bench and Floor Sweeper for 63mm Hose

• Keep your workshop clean with this multi-function dust extraction accessory, which can pick up dust, chips and shavings from every corner of the space.
• The handle section attaches to an extractor hose with 63mm internal diameter. The hose is secured by tightening the butterfly hose clamp provided.
• An adjustable air vent is provided to ensure that an adequate airflow is maintained at all times & prevent a vacuum being crated in the hose.
• When picking up from a workbench or cleaning up a machine there are a choice of 2 nozzles which can be fitted to the handle section. They are a simple push fit.
• The surface vented nozzle is used at a comfortable 45 degree angle for picking up loose dust and chips from hard surfaces. The brushed nozzle is used for picking up stubborn compressed dust which requires agitating first.
• Once the higher areas are clean, the handle section can be connected to a clear tube with a 140mm wide floor cleaning nozzle on the far end. this will allow all of the floor areas to be cleaned.
• Can be used with a vacuum type or bag type extractor.
• The kit also includes 2 metal wall brackets, which the sweeper clips into, until it is needed again.
• Connects To 63mm (2.5") Extractor Hose
• Handle Section Includes Adjustable Air Vent
• Butterfly Hose Clamp Included
• 2 Alternate Bench Sweeping nozzles Included
• 915mm (36") Long Clear Tube For Floor Sweeping
• Wide Nozzle for Floor Cleaning Included

• Hose Connection: 63mm (2.5") Diameter
• Bench Nozzles: 75mm x 60mm
• Floor Nozzle: 140mm x 90mm
• Clear Tube: 915mm Long
• Material: Rigid Plastic

Knowledge Centre - Buyers Guide to Dust Extraction