Charnwood CE12 1/2" Collet Extension 1/2" Shank to 1/2" Collet

Charnwood CE12
Collet Extension for 1/2"
Shank Routers, 60mm length

• Extends the collet by 60mm.
• When working with a router table which has a table made of thick material, typically the cast iron type or home made tables, a collet extension may be required.
• Certain jobs require the cutter to be lifted above the surface of the table. If the table is thick, there may not be enough plunge depth on the router to achieve this.
• This collet extension can be used with all 1/2" shank routers and will lift the cutter by an additional 60mm.
• A 19mm and a 22mm spanner are required to tighten the collet.
• To use 1/4" shank cutters, you can add the collet sleeve made by Trend, which reduces the collet to 6.35mm.