Charnwood BD610 Charnwood Belt and Disc Sander 6" x 10"

Charnwood BD610 - Charnwood Belt and Disk Sander 6" x 10" 

• A heavy duty workshop sander, with the traditional combination of belt and disc, driven via belt by a quiet 1hp induction motor. The large diameter disc is fitted with a sturdy aluminium table which is secured on both sides. Radiused guides allow the table to tilt to 45 degrees and be accurately locked at any angle. The table also has a T slot for the mitre guide, which is adjustable to 60 degrees each way.    A sanding belt of this size would most commonly be used in the horizontal position, however it can be moved into the vertical position when required. The belt has a back stop fence with a removable plate, allowing the user to make their own plate to suit any application they have.
• Given that there may be times when you need to move this machine off the work bench, the design incorporates a pair of carry handles. A single dust collection outlet gives efficient extraction, from both the disc and belt, when connected to a suitable vacuum or extractor.  The sander sits on 4 rubber feet or can be secured to a work bench using the 4 mounting points provided. Supplied with mitre guide, 1 x 80 grit sanding belt, 1 x 80 grit self adhesive sanding disc, 1.75m power cable and UK 3 pin plug. 

• The open end of the sanding belt can be used for finishing curved shapes and edges.

• Disc Diameter 250mm (10”)
• Disc Speed - 2850rpm
• Work Table Size - 330mm x 170mm
• Work Table Tilt 90 – 45 degrees
• Work Table T Slot - 16mm / 20mm
• Belt Size - 150mm x 1220mm (6” x 48”)
• Belt Speed - 550m/min
• Motor (Induction) 240v, 50hz - 750w (1hp)
• Dust Extraction Outlet -  50mm OD / 45mm ID
• Overall Dimensions (WxDxH) - 770mm x 570mm x 400mm
• Shipping Dimensions - 740mm x 460mm x 470mm
• Weight - 31kg
• Rating - Hobby
• Warranty - 5 Years

Charnwood Operators Manual

Charnwood Machinery 5 Year Guarantee