Charnwood BB06 Bandsaw Blade 1575mm x 10mm x 6tpi to fit B225

Charnwood BB06 Bandsaw Blade

1575mm x 10mm x 6tpi to fit B225

Premium bandsaw blades feature a spring tempered high carbon steel blade with induction re-hardened teeth to 62HRC, providing decreased production times, better surface finish, increased fatigue resistance and longer blade life. Manufactured in Great Britain. Designed for all types of wood cutting, including contours.

Manufactured in Great Britain.

• Ground teeth assure precision cutting, better finish and less kerf loss.
• High carbon steel body hardened and tempered to 45 Rockwell C Hardness withstands greater cutting pressures and optimises fatigue strength.
• Faster and more precise cuts.
• Hardened teeth to 62HRC ensure longer life.
• Teeth can be re-ground or re-shaped and re-set.
• Lower cost per cut.

When we first tested these new bandsaw blades we couldn’t believe the high cutting speed compared to a standard blade. Furthermore the high cutting speed was achieved without any compromise on the finish.
After longer testing it was noticeable that the cutting edge remained sharp long after standard ‘unground’ blades would have blunted.

Suitable for use with;

• All types of wood including nail embedded wood.
• Non-ferrous metals.
• Plastic and Acrylic.

For use with Charnwood model B225 and similar bandsaws.

• Blade Length: 1575mm (62")
• Blade Width: 10mm (3/8")
• Blade Thickness: 0.5mm (020)
• Teeth per Inch: 6
• Tooth Pattern: Skip
• Material: High Carbon Steel
• Tooth Finish: Ground