Charnwood 100Y 100Y Y Piece with 3 x 100mm Outlets

Charnwood 100Y
Y Piece with 3 x 100mm Outlets

• Y shaped splitter with 3 x 100mm ends. Used To split a single hose line into two branches when creating multiple connections.
• Three connections are all 100mm diameter. For use with our 100FLEX Hose. Hose clamps are required to fasten the hoses securely (100HC). 
• A Joining Sleeve (100SL) can be fitted to any end of the Y Piece to connect it to another fitting such as a Reducer or Shut off Gate.
• When using two branches it is recommended to close off any branches not in use, so that a higher airflow is achieved down the active branch. Shut off gates (100G) can be attached to the T-piece using a joining sleeve (100SL). These tapered sleeves form a tight push fit joint. Hoses can be attached to the gate with a hose clamp.
• The splitter is available in a Y or T shape. Sometimes the T shape is an advantage when creating a hose network, particularly when dropping down from head height. However the airflow is not as efficient as with the Y shaped branch.

Buyers Guide to Dust Extraction