CMT 3-in-1 Flush Trim Router Cutter Bits for Laminates - 807

CMT 3-in-1 Flush Trim Router Bits for Laminates
 

Please choose from options above

3 in 1 new flush trim bits with Delrin® triangular bearings are your best partner for laminate trimming. In fact they solve 3 of the most common problems that occur in flush trimming in cabinet shops.

• The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue.
• The extended guide surface of the new Delrin® bearing will perfectly match the work surface without scratching like the steel bearing would. The Delrin® bearing also guarantees maximum stability.
• The shear angle cutting edge reduces the need for filing. 3 in 1 bits are ideal on plastic laminates as well as aluminium laminates!
• 3-in-1 bits are ideal on plastic laminates, as well as on aluminium laminates!
• PATENT N. D628,218.
  Extended guide surface.
  Non-freezing.
  Non-scratch surface.
• Perfect trimming with conical edges! Thanks to the innovative conical edges of this bit, you will always get perfect cuts even after re-sharpening. In fact, the most common problem you have with standard flush trim bits is the undersized diameter after re-sharpening which leaves a mark on the material; with the new CMT construction you could re-sharpen up to six times without any problem. Just remember to adjust your bit up or down.