Yorkshire grit is an abrasive paste formulated to give a fine keyed surface to your turnings, prior to applying your finish of choice. It consists of pharmaceutical grade ingredients, including mineral oil, beeswax and ultra fine grinding powders. These are then carefully blended (without the use of solvents or other strong smelling and potentially harmful chemicals) to produce a creamy abrasive paste. Yorkshire Grit acts like ‘liquid sandpaper’, reducing the scratches left by the initial dry sanding* and eliminating the increasingly fine dust produced by traditional sanding at higher grits. On most woods sanding up to 240 grit is sufficient to start with our paste. The grinding powders we use are designed to break down to a finer mesh as they are used, while still maintaining a cutting edge, so as the friction reduces the mesh size of the grit it is effectively forming a finer abrasive. In comparison tests we believe the finish is at least equivalent to 1000 grit. As a keen woodturner myself, I am always striving for that flawless finish, be it satin, gloss or that “dipped in glass” look. Experience has taught me that preparation is everything; You only have to watch French Polishers in action to have something to aspire to. We don’t generally take the time to slowly build the finish to a glass like surface as they do, but some of the methods and processes can be incorporated into our lathe finishing techniques.