| Robert Sorby MICRO BORING TOOL - 888/6|
Product Code: RS/888/6
Robert Sorby 888/6
Micro Boring Tool
As the name suggests this tools is designed for boring out apertures and for straight hollowing on small projects.
This range of tools was dev...
| Robert Sorby Micro Carving Tools|
Product Code: RS/MCT_MST
Robert Sorby Micro Carving Tools
Robert Sorby micro carving tools are manufactured to the same exacting standards as the full-size tools.
| Robert Sorby MICRO CURVED UNDERCUT SCRAPER - 888/10|
Product Code: RS/888/10
Robert Sorby 888/10
Micro Curved Undercut Scraper
Designed for blending the parallel side wall and the curved bottom of vessels and boxes. It is also excellent for undercutting the rims of sma...
| Robert Sorby MICRO DIAMOND UNDERCUT SCRAPER - 888/12|
Product Code: RS/888/12
Robert Sorby 888/12
Micro Diamond Undercut Scraper
Used on square bottomed boxes, the end profile allows the tools to create a right angled juncture between the side wall and the bottom. The 8...
| Robert Sorby MICRO FRENCH CURVE SCRAPER - 888/11|
Product Code: RS/888/11
Robert Sorby 888/11
Micro French Curve Scraper
Designed for blending the parallel side wall and the curved bottom of vessels and boxes. It is also excellent for undercutting the rims of small ...
| Robert Sorby MICRO GOUGE - 888/4|
Product Code: RS/888/4
Robert Sorby 888/4
Similar to the 888/1 modular roughing gouge, but with wings swept further back in the guise of a continental roughing gouge, further reducing the risk ...
| Robert Sorby MICRO HOLLOWING TOOL - 873|
Product Code: RS/873
Robert Sorby 873
Micro Hollowing Tool
Designed for hollowing miniature work. Will work through the narrowest of apertures, down to as small as 3/16" (5mm). Incredible intricacies can be a...
| Robert Sorby MICRO PARTING TOOL - 888/3|
Product Code: RS/888/3
Robert Sorby 888/3
Micro Parting Tool
A smaller version of the full size diamond parting tool, the special profile of this tool reduces the risk of binding in the cut. It also reduce...
| Robert Sorby MICRO ROUND NOSE SCRAPER - 888/9|
Product Code: RS/888/9
Robert Sorby 888/9
Micro Round Nose Scraper
Used on bowls and platters to create smooth flowing curves. This popular micro tool has a 50 percent finer cutting edge than the smallest ...
| Robert Sorby Micro Sandmaster|
Product Code: RS/MS_MST
Robert Sorby Micro Sandmaster
Like its full-sized equivalent, the micro sandmaster has an adjustable head for access into tight corners. It comes with a velcro covered spong...
| Robert Sorby MICRO SANDMASTER UNHANDLED - 888/0|
Product Code: RS/888/0
Robert Sorby Micro Sandmaster Set
Like its full-sized equivalent, the micro sandmaster has an adjustable head for access into tight corners. It comes with a velcro covered s...
| Robert Sorby MICRO SHEAR SCRAPER - 868|
Product Code: RS/868
Robert Sorby 868
Micro Shear Scraper
This tool comes fitted with a 3/8" teardrop shear scraper (RS222). Ideal for creating a smooth finish that requires little if any sanding. Like its la...
| Robert Sorby MICRO SKEW - 888/8|
Product Code: RS/888/8
Robert Sorby 888/8
This tool is superb for miniature spindle work such as bed posts and table legs. Feel confident working the intricacies required for scale models with t...
| Robert Sorby MICRO SPINDLE GOUGE - 867|
Product Code: RS/867
Robert Sorby 867
Micro Spindle Gouge
Ideal for fine detailing on spindle work. Having the wing tips ground back reduces the danger of them catching when working in confined areas. Th...
| Robert Sorby MICRO SPINDLE ROUGHING GOUGE - 888/1|
Product Code: RS/888/1
Robert Sorby 888/1
Micro Spindle Roughing Gouge
This range of tools was devised by Robert Sorby following the success of the Sovereign system. This miniature version is centred on two sizes of...
| Robert Sorby MICRO SPINDLEMASTER - 888/2|
Product Code: RS/888/2
Robert Sorby 888/2
A miniature version of its versatile big brother – the modular micro Spindlemaster can be used to plane, bead, cove and trim end grain. ...
| Robert Sorby MICRO SPIRAL TOOL SET - WITH HANDLE- 370A|
Product Code: RS/370A
Robert Sorby 370A
Micro Spiral Tool Set - with Handle
The micro spiralling tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spiralling Sy...
| Robert Sorby MICRO SPIRAL TOOL UNHANDLED - 370/0|
Product Code: RS/370/0
Robert Sorby 370A/0
Micro Spiral Tool Set - Unhandled
The micro spiralling tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spi...
| Robert Sorby Micro Spiralling Tools|
Product Code: RS/MST_MST
Robert Sorby Micro Spiralling Tools
The micro spiralling tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spiralling System. Instructions included. ...
| Robert Sorby MICRO SWAN NECK HOLLOWING TOOL - 888/7|
Product Code: RS/888/7
Robert Sorby 888/7
Micro Swan Neck Hollowing Tool
A great tool for developing the undercut and taking the hollowing shape to the next level. Excellent for developing small hollow forms such as...
| Robert Sorby MICRO TURNING 12 PCE SET in WALLET - 888HS12T|
Product Code: RS/888HS12T
Robert Sorby 888HS12T
12 Tool Modular Micro Set
This set of 12 modular micro tools encompasses a range of the most popular micro woodturning blades. Great for a range of projects including spi...
| Robert Sorby MICRO TURNING 18 PCE SET in BOX - 888HS18T|
Product Code: RS/888HS18T
Robert Sorby 888HS18T
18 Tool Modular Micro Set
The 18 Tool Modular Micro set has all the tools the micro woodturner needs to create anything from beautiful pens to intricate dolls’ hous...