TREND BS/JIG BELFAST SINK JIG

Trend Routing On-Site Jigs
BS/JIG - Belfast Sink Jig

• For routing Belfast /Butler sinks
• Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate
• Will also allow drip channel groove to be routed on the underside of the worktop
• Corner radius of 25mm. Maximum distance 630mm or 1030mm when overlapping slots
• For sinks 1050mm wide and 440mm to 515mm deep
• Twin pin location for stable and accurate lining up of jig. Preset holes for 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 480mm and 500mm width, a packing piece required for sizes in between

Jig requires:

• A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
• A template guide bush with 30mm outside diameter for main recess and 16mm outside diameter for water drip groove.
• A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length for main recess and a radius cutter R2.5mm for the water drip groove
• Two 100mm (4 inch) throat clamps
• Supplied with clear & comprehensive instructions for use

• 6 x 10mm pins
• 1x Datum setting block

• Length: 625 mm
• Width: 590 mm
• Thickness: 12 mm
• Weight: 3.6kg