Veritas PMV11 Combination Plane Beading Blade 1/2" - 05P5283

Veritas Combination Plane Beading Blade PM-V11 - 1/2" - (Ref: 104187 / 05P5283)
 

• This beading blade produces a 1/2" (12.7mm) wide bead with a 1/16" (1.6mm) groove or quirk on each side. When setting the Combination plane, move the sliding section so that it supports the outside edge of the blade. Adding a bead to a tongue-and-groove joint minimises the visual effect of expansion and contraction. To cut an edge bead where you do not want the quirk, position the fence tangent to the bead. Made of PM-V11 steel it has a 35° bevel angle.
• PM-V11 is highly resistant to dulling or damage from wear and impact. These blades can take a keen edge and hold it through extended use. PM-V11 is as easy to sharpen as A2 tool steel using water stones or other common sharpening methods. The lapped back only requires a light honing before use. It can perform right-hand or left-hand cuts, simply by changing the combination plane’s fence from one side to the other. 

• Made of PM-V11 steel with a 35° bevel angle
• Produces 1/2" (12.7mm) wide bead
• Extremely durable steel alloy
• At least twice the edge life of A2 steel
• Highly wear-resistant, yet easy to sharpen
• Lapped blade back, only requires minimal honing
• Made in Canada