Sedgwick TA-450-3 Tilt Arbor Sawbench (3 Phase)

Product Code: SWM/TA-450-3

Brand: SEDGWICK

Stock Due Soon
Please Call For Update

£5,443.20 Inc. VAT

£4,536.00 Exc. VAT

Check out our Fair Deal on Delivery Promise

Sedgwick TA-450 Tilt Arbor Sawbench (3 Phase)

Ease of operation

The backbone of a joinery workshop is its saw bench and the sedgwick TA450 has been central to that for many years. It should be powerful, accurate, reliable and simple and safe to operate. The Sedgwick range of saws is designed with this in mind, and offers outstanding value for money. Their strength is in their construction, precision engineering, and our insistence on using only the best quality components.

Construction

A large cast iron table mounted on a heavy duty steel cabinet provides maximum timber support and a stable and accurate base for anchoring the spindle, rise and fall, and tilt mechanisms. The spindle is powered by a high efficiency IE2 industrial rated motor via a three belt drive, and features large diameter saw flanges for blade stability. It runs in ‘sealed for life’ bearings mounted in a cast iron housing, and requires only minimal maintenance. Rise and fall and tilt mechanisms are square thread screws operated by hand wheels at the front and side of the machine. Both are easily accessible.

Versatility

The rip fence is aluminium section, allowing for two working positions (ripping and angled ripping) and for movement fore and aft in relation to the saw blade. It is fixed to a heavy duty cast iron mounting bracket for rigidity, and has integral micro adjustment. The assembly runs on a nylon roller, gliding easily across the beds, and is supported by a 40mm diameter solid steel bar for rigidity, which gives 915mm capacity from the saw blade (an optional RH extension table is available to increase this to 1220mm).

Safety Features

Polycabonate overhead sawguard with 100mm dia Extraction Outlet
Electro-magnetic Braked Motor
Thermal overload no volt release protection
Lock off emergency stop Button
Lock off emergency foot switch
Lockable isolator

Specifications

Saw blade dia.: 450mm
Bore : 30mm
Saw blade projection @90 degrees : 155mm
Saw blade projection 45 degrees : 105mm
Motor : 5.5kw 3phase 440volt (S1)
Table size : 1125mm x 1000mm wide
Table Height : 855mm
Distance saw to fence : 915mm
Rip fence with micro adj.: 825x75mm
Dust outlet at rear : 150mm
Dust outlet top guard : 50mm
Dust Extraction Required : 1445 CMH
Weight : 425kg
Cross cut table, optional extra 600 x 350mm wide
Distance saw to cross cut fence : 620mm
Panel sizing table, optional extra 950 x 1000mm wide
Distance saw to cross cut fence : 1220mm
Right hand table extension 800 x 700mm wide
Distance saw to mitre fence 1220mm
Rear take off table, optional extra 800 x 700mm

Optional Equipment

Cross Cut & Panel Sizing Tables

Designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming, the Cross Cut Table is supported on the RHS by precision ground, case hardened bearing rollers running on a 40mm diameter solid steel bar, and on the LHS by a cast jib. The fence is aluminium section and features a telescopic arm, a flip over stop, and a quadrant scale (90degs - 45degs).

shown with optional side and rear take off tables