Reserve

Yours Now

The New MPower

Single Ended Tenoner

Sliding Table Panel Saw with 1700 mm aluminium sliding table (2350, 2700, 3300 mm optional).
 

Sliding Table Panel Saw with 2600 mm aluminium sliding table (3270 mm optional).

Sliding Table Panel Saw with saw blade ø 350 mm, over arm guard and 2600 mm aluminium sliding table (3270 mm optional).

Sliding table panel saw with manual movements and saw blade ø 315 mm with scoring blade on.
Available, on request, with electronic digital readout of parallel fence position.

Sliding table panel saw with manual movements and saw blade ø 400 mm with scoring blade on. Available, on request, with electronic digital readout of parallel fence position or with NC control of parallel fence position.
 

Sliding table panel saw with manual movements and saw blade ø 400 mm with scoring blade on.
Available, on request, with electronic digital readout of parallel fence position or with NC control of parallel fence position.

Sliding table panel saw with powered movements and saw blade ø 400 mm with scoring blade on.
Available, on request, with electronic digital readout of parallel fence position or with NC control of parallel fence position.

Entry-level Sliding Table Panel Saw

Sliding table panel saw with powered movements and saw blade ø 350 mm with scoring blade on.
Available, on request, with 2 or 3 axes numeric control.

Sliding table panel saw with saw blade ø 400 mm with scoring blade on.
Available in manual or automatic version, with up to 5 controlled axes.

Sliding table panel saw with saw blade ø 450 mm with scoring blade on.
Available in manual or automatic version, with up to 5 controlled axes.
 

Surface planer with cast iron tables 2610 x 410 mm.
Infeed table height adjustment through quick action lever.

Surface planer with cast iron tables 2610 x 410 mm.
Infeed table height adjustment through quick action lever.

 Surface planer with polished cast iron tables 2600 x 410 mm.
Infeed table height adjustment through quick action lever.
All electric controls are centralised and conveniently located in the main control cabinet.

Surface planer with polished cast iron tables 3000 x 510 mm.
The machine is equipped, standard, with powered infeed table raise & fall and with electronic digital readout of the cutting depth.
All electric controls are centralised and conveniently located in the main control cabinet.

Heavy-duty thicknessing planer. Four feed speed, powered raise & fall on 4 columns,                          250 mm maximum working height are part of the standard composition of the machine.

Heavy-duty thicknessing planer. Four feed speed, powered raise & fall on 4 columns,                          300 mm maximum working height are part of the standard composition of the machine.
 

Heavy-duty thicknessing planer. Four feed speed, powered raise & fall on 4 columns, 300 mm maximum working height are part of the standard composition of the machine.

Heavy-duty Planer. Stepless feed speed control by inverter, powered raise & fall on 4 columns, 300 mm maximum working height, are part of the standard composition of the machine.

Combined Surface/Thicknessing Planer 300 mm.

Combined Surface/Thicknessing Planer 410 mm.

Combined Surface/Thicknessing Planer 300 mm with simultaneous surface table opening.

Professional Surface/Thicknessing Planer. Main features of the machine are heavy-duty construction and ease of use.
Powered raise & fall of the table with 4 columns and electronic digital readout for thicknessing table height are part of the standard composition of the machine.
Surface tables 520 x 2300 mm, maximum cutting depth 8 mm.
Fast surface tables opening by pneumatic system available on request.

SYNCRO 18

Syncro is Casadei latest answer for planing and straightening in the easiest and most economical way. Compared to traditional working process on Surface and Thicknessing Planer, working times are dramatically reduced.
With Syncro all four sides can be machined with a single pass.

MATRIX 23

Four Sides Straightening Planer for large section, allow to machine, simultaneously, all the 4 sides. Maximum finished section: 230 x 120 mm.
The machine is available with 4 spindles.

 

MATRIX 23 SUPER

Matrix is the result of years of researches and development into the engineering and manufacturing of Automatic Throughfeed Moulders. Reliable and productive, the Matrix is built with quality components, designed and tested to reach the best results.
Maximum finished section: 230 x 120 mm.
The machine is available in 2 versions: Matrix 23 Super / 4 (4 spindles), Matrix 23 Super / 5 (5 spindles). Both models are avialable, on request, with universal spindle.
 

Spindle moulder with fixed or tilting spindle 90°/45°

Spindle moulder with fixed or tilting spindle 90°/45° 

Heavy-duty Spindle Moulder with fixed spindle.
The heavy-duty construction makes this machine the ideal solution for the most demanding customers.
Available in basic version, with heavy duty tenoning table (“T” version), with cast iron side extension tables and front support bar for profiling (“LL” version) and with heavy duty tenoning table, cast iron side extension table on the right and front support bar for profiling (“TL” version).

Heavy duty Spindle Moulder with tilting spindle - 45° ÷ + 45°.
The tilting spindle makes the F 25 a machine extremely flexible and versatile suitable to any working requirement. Available in basic version, with heavy duty tenoning table (“T” version), with cast iron side extension tables and front support bar for profiling (“LL” version) and with heavy duty tenoning table, cast iron side extension table on the right and front support bar for profiling (“TL” version).
 

Heavy-duty, high performance spindle moulder with fixed spindle. The heavy-duty construction and the wide range of standard and optional equipments, makes this machine the ideal solution for the most demanding customers.

The tilting spindle - 10° ÷ + 45° makes the F 250 a machine extremely flexible and versatile.
The broad choice of options together with the tilting spindle, make the machine suitable to any working requirement.

Universal Combined Machine with 300 mm working width.

Universal Combined Machine with 410 mm working width.

Universal professional combined machine with 410 mm working width built with the construction method of the stand-alone machines.

Combined Circular Saw/Spindle Moulder

Automatic Edge Bander for pre-glued edges from a minimum of 0,4 mm to a maximum of 2 mm thickness.
The machine is compact, reliable and easy to use and to adjust.
The low investment and the small footprint make the machine accessible to artisans and small shops.

The installed groups are the followings:
• "Leister" blower with electronic temperature adjustment (20°C ÷s 450°C)
• End cutting unit
• Top and bottom trimming unit with TCT cutterheads
• Top feed unit for smooth and constant panel feed

The machine is complete with:
• Kit for edge with thickness up to 1,5 ÷ 2 mm, including:
- 4 idle rollers on the machine table
- Adjustable infeed fence with numeric readout
- 75 mm combined cutterheads (radius 2 mm)
- Numeric readouts for top and bottom trimmers adjustment
- Rolled edges tray diam. 730 mm

Main optionals available:
• Single phase motors 50/60Hz

ALA 20 is suitable for edges up to 2 mm, in rolls or strips, of melanine, PVC, ABS, solid wood with minimum thichness 0,4 mm up to 2 mm.
The machine is equipped with an aluminium glue pot with 5 heating elements to evenly heat up the glue to apply on the panel edge by means of a serrated glue spreader roller with micro adjustment.
The machine is compact, reliable and easy to use and to adjust.The low investment and the small footprint make the machine accessible to artisans and small shops.

The installed groups are the followings:
• Glue pot with electronic temperature adjustment
• End cutting unit
• Top and bottom trimming unit with TCT cutterheads
• Top feed unit for smooth and constant panel feed

The machine is complete with:
• Kit for edge with thickness up to 1,5 ÷ 2 mm, including:
- 4 idle rollers on the machine table
- Adjustable infeed fence with numeric readout
- 75 mm combined cutterheads (radius 2 mm)
- Numeric readouts for top and bottom trimmers adjustment
- Rolled edges tray diam. 730 mm

Main optionals available:
• Kit for wood rolled edges up to 2 mm
• Single phase motors 50/60Hz

Stroke sanders available in 2 different models:2500mm and 3000mm

Oscillating vertical belt sanding centre. The standard composition of the machine includes a 2 speeds motor. The production of internal and external, vertical and angled workpieces are easily accomplished from the working position in total safety.

Wide Belt Sanders for the artisan.
The machine is available in one configuration with combination head contact roller and platen.

Wide Belt Sanders designed for the artisan.
The Libra 30 features a compact and sturdy structure, great machining precision, ease of use and safety for the operator.
Machine available in 2 different configurations with one or two operating units.
 

Libra 40

Wide Belt Sanders for the small to medium industry, the Libra 40 Series offers a wide range of models capable to fulfil the demand of most users. A complete standard version and the wide range of options make the Libra 40 extremely flexible and customisable for different applications. Machine available in 5 different configurations with 1, 2 or 3 operating units, 1, 2 or 3 motors.
Usable working width: 1100 and 1350 mm

Manual router equipped with tilting head (not available in CE configuration)with throat depth 600 and 800 mm.
The large sized cast iron table ensure ample support for large sized workpieces. The head is equipped with a 6 position turret stop to facilitate head height repositioning for different jobs.

Single-head, 21-spindle boring machine.The machine is designed for vertical, horizontal and 45° boring. The boring unit, a single-piece aluminium casting, runs on two ground cylindrical guides.
The machine is complete with:
Lateral fence L= 3000 mm with retractable stops
No. 21 spindles preset for quick change adaptors
The FM 21 can be completed with different options for specific applications.

Options available:
Horizontal/vertical automatic positioning of boring unit
No. 11 drilling bit-holder bushes 10 mm diameter
Fence for horizontal boring at 45°