230/4PM
|
| Specification: |
| Head sequence:- |
First Bottom.............5.5kW(7.5hp)
Fence/Near Side.......7.5kW(10hp)
Top..........................5.5kW(7.5hp) |
| |
| Capacities: |
| Maximum size of timber admitted |
230 x 130mm |
| Maximum size of finished work |
220 x 120mm |
| Minimum finished size |
18 x 7mm |
| Minimum length single/through- feed |
480mm |
| |
| Cutting Circles: |
| Minimum cutting circle |
100mm diameter |
| Maximum cutting circle |
180mm diameter |
| Maximum cut on first Bottom |
10mm |
| Edge reference to first Bottom |
140 x 10mm |
| |
| Feed System: |
| Feed speeds 6 & 12 m/min with 0.8/1.1 kW
feed motor |
| Spring loading to feed rollers |
| Feed roller diameter |
120mm |
| Inch forward control for setting |
| |
| Electrical: |
| Feed motor 0.8 / 1.1 kW |
| 400v/3ph/50hz |
| Motor start and stop buttons |
| Control panel master stop |
| No volt and overload protection |
| Lockable main isolator |
| |
| Feed selections: |
| 2 metre long in-feed straightening table
and fence |
| Feed speeds |
6 & 12m/min |
| Spindle speed |
6000 rpm |
| |
| Cutter equipment: |
| Set of 3 knife cutter blocks
comprising of: |
| Edge reference disc 140 x 10mm |
| Two 230mm x 120mm diameter three knife
planing cutterblocks each with three 3mm HSS knives |
| Two 130mm x 120mm diameter three knife
planing cutterblocks each with three 3mm HSS knives |
| |
| Cutting Head Units: |
| 40mm diameter spindles with rotation of
6000rpm |
| All spindles have horizontal and
vertical adjustments except 1st bottom which has
vertical only. No vertical adjustment between top head
and feed rollers (fixed cutting circle) |
| Maximum cut on 1st bottom and 1st fence
side head is 10mm |
| |
| Included with the machine: |
| Lift up front safety cover electrically
interlocked with timed control |
| Mechanical digital read-outs for width
and thickness measuring 0.1mm |
| Idle side roller pressures opposite
fence side head, moving with near side head |
| Idle top roller pressure opposite near
side head |
| Dust hoods (120mm diameter) |
| Setting device for planing knives |
| Instruction and spare parts manual |
| |
![[Under Construction]](../images/undercon.gif)
